Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Repair for McDonough Homeowners
A garage door that won’t open, closes crooked, or sounds like a gunshot when the spring lets go is not something you schedule around. It’s something you need fixed today. Servo Garage Doors has repaired garage doors across McDonough since 2015, and we do it under a rule most companies won’t put in writing: you get a flat, written price and a written scope before any work begins. No “call for a quote.” No surprises when the invoice lands. Just a documented paper trail from diagnosis to done right. Call (470) 928-4767 and a real person answers, 24/7.
What Our Garage Door Repair Service Includes
Garage door repair in McDonough usually means one thing to a homeowner: the door quit working. To us, it means six distinct systems that can fail independently or together. Here’s what each repair involves and what we do about it.
Spring Repair
Torsion springs are the counterweights for your door. They sit on a steel shaft above the opening, and when one breaks, the opener suddenly has to lift the door’s full weight alone. That’s when you hear the bang in the garage. In McDonough, where summer heat cycles and winter temperature swings put repeated stress on the metal, we see clean breaks at the coil more often than slow failures. The spring is measured by wire diameter and inside diameter, not guessed at, and we quote the replacement before removing anything. Spring repair runs $180-$340 depending on the spring’s size and whether you have one or two.
Cable Repair
Cables are the steel braid lines that do the actual lifting. They run from the bottom brackets up through the drums at each end of the spring shaft. When a cable frays or snaps, the door drops unevenly or hangs at an angle. This is not a fix to attempt without the right tools. A cable under tension from a partially wound spring will travel fast when released. We bring the right replacement length, re-seat the loop at the bottom bracket, and verify both sides carry equal tension before we call it done. Cable Repair in McDonough runs $130-$250.
Panel Replacement
A bent panel isn’t just cosmetic. Once a panel creases, it loses structural stiffness, which throws the whole door out of balance. The rollers bind, the tracks wear unevenly, and the opener strains. We match the panel by door brand, width, and section profile, and we tell you honest math: sometimes replacing one panel costs enough that a new door is the smarter spend. Panel Replacement in McDonough runs $250-$500 depending on the section and brand.
Track Realignment
Track problems usually announce themselves as a grinding noise or a door that catches halfway. The vertical and horizontal track sections must line up within a narrow tolerance, and the track itself must remain plumb and level. We see doors in McDonough neighborhoods like Summer Lake and Creekside that have settled slightly over ten years, taking the track out of square. The fix is re-shimming the mounting brackets and resetting the track gap, not just greasing the rollers. Track realignment runs $120-$240.
Roller Replacement
Rollers ride inside the track and guide the door through the curve where the vertical and horizontal tracks meet. Steel rollers wear by grinding, nylon rollers wear by flattening. Worn rollers score the track and strain the opener. We replace all ten or twelve in the set, not just the loud one, because mixing old and new rollers shifts the load unevenly. Nylon rollers run quieter on the curved track, which matters if you have a bedroom above the garage. Roller Replacement in McDonough runs $110-$220.
Sensor Calibration
The photo-eye sensors are the two small units near the bottom of the track, one sending an infrared beam and one receiving it. If the beam is blocked or misaligned, the opener refuses to close. That’s a safety feature working correctly, not a defect. The fix is a level, a steady hand, and clean lenses, plus testing the reverse function under load. Sensor Calibration is quick work, but it has to be done right so the door reverses when it should.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Repair
Servo Garage Doors services all eight major door and opener brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We stock OEM parts and common failure components for each, which means a repair truck in McDonough typically has what it needs on board rather than returning next week.
Chamberlain and LiftMaster openers share a parent company and a lot of engineering, so we carry interchangeable logic boards, belt assemblies, and gear kits for both lines. Craftsman units have been in American garages for decades, and the older chain-drive models are still common around McDonough; the nylon gear that strips inside the drive assembly is a part we replace regularly. Raynor doors are common on the commercial side, but plenty of residential Raynor models sit on homes built in the 2000s, and we keep their hardware on hand. Whether you have one of these or something less common, the process is the same: diagnose, document with photos, quote a flat price in writing, and get your approval before touching a part.
BeforeAfterSigns You Need Garage Door Repair Right Now
- The door is loud. A garage door should open with a steady hum, not a grinding, popping, or shrieking noise. Grinding points to worn rollers or track misalignment. Popping usually means a failing spring. Loud noises are the early warning before a part fails completely and the door stops moving with your car inside.
- The door sags on one side. If one side of the door hangs lower than the other when it’s resting on the ground, the cables are stretching unevenly or a spring has lost tension. A door that opens crooked is putting side load on the track that will eventually bend it.
- The door reverses for no reason. A cold garage floor, a dirty sensor lens, a misaligned beam, or a failing logic board can all trigger an unexpected reverse. When it happens consistently, the safety circuit is telling you something. Let a technician read the sensor output rather than blind-cleaning lenses.
- The opener runs but the door doesn’t move. The motor hums and the chain does nothing. The gear or sprocket that connects the motor to the rail has failed. On newer belt drives, the carriage that grabs the arm can strip. Both are mechanical fails that don’t improve by continuing to press the button.
- The door is slow or hesitant. A door that hesitates in one spot, bulges twice as it passes through the radius, or shudders near the top is fighting friction somewhere. It could be the rollers, the hinges, or the spring tension being too low. Left alone, the opener works harder than it was built to, and the problem migrates from a $120 roller set to a $250 logic board.
Our Garage Door Repair Process - Step by Step
- 1
You call (470) 928-4767. A real person answers, day or night, including holidays. You describe the problem in your own words. We ask what the door is doing, what you’ve already tried, and what brand the door and opener are. You get a named technician and an on-the-way text, not a four-hour window.
- 2
The technician arrives, test-cycles the door, and photographs what he finds. Before anything is unbolted, he runs the door through a full cycle, listening and watching. He checks the spring with a winding bar gauge, tests the balance point, inspects the rollers, cables, hinges, and track in sequence. Every failed component is photographed. Clause 4 of The Haven Standard means you see the broken part with your own eyes before anyone quotes a replacement.
- 3
We hand you a written price and a written scope. The quote lists the failed part, the part number where applicable, the labor to remove and install it, and any related work that should happen at the same time. The price is flat. The scope is complete. You decide before anyone puts a wrench to your door. Clause 1 exists so this moment never feels like a negotiation.
- 4
The repair is completed with the truck-stock parts we carry. Most McDonough repairs are done on the first visit. Springs, cables, rollers, sensors, gears, and logic boards are on the truck. If your door is an odd brand or an older panel style that needs ordering, you know before we leave, along with the exact lead time and the same written price.
- 5
We test the door under spring tension, open its full travel, verify the reverse, and run it five times. Then we photograph the completed work. You get a documented photo record of what was found and what was done, plus the warranty in writing. Every visit closes the same way: evidence, not a handshake.
How Much Does Garage Door Repair Cost in McDonough?
Garage door repair in McDonough runs $150-$600 depending on what failed. A sensor recalibration is the low end around $150. A stripped opener gear or a failing logic board runs $120-$320. A torsion spring replacement runs $180-$340. Track realignment runs $120-$240. When a door needs multiple systems addressed in one visit, the price lands toward the top of the range, but it’s always a flat number you approve before work begins.
Three things move the price. The part itself, whether the job requires two springs versus one, and whether the door is a standard 7-foot or an 8-foot model that’s less common. Homes in McDonough’s newer subdivisions on the east side of I-75 tend to have standard doors from the big three builders, and those parts are on the truck. Custom doors in older neighborhoods around the Square sometimes need ordering.
The way to avoid overpaying is to ask one question before anyone starts: “What’s the written price for the whole job?” If the answer is a sigh, an estimate range, or “I’ll have to see once I get in there,” that’s not a quote, that’s a negotiation-based business model. Servo’s answer is a piece of paper with a number on it. The estimate is free, the price is flat, and you keep the written scope whether you hire us or not.
Garage Door Repair Near McDonough - Our Service Area
Servo Garage Doors covers McDonough proper and the surrounding corridor: Stockbridge, Locust Grove, Hampton, Lovejoy, Irondale, Jonesboro, Morrow, Griffin, Riverdale, Forest Park, and Fayetteville. We know the drive times, the subdivisons, and the HOA expectations in each; a spring replacement in Locust Grove takes the same written-price process it takes in McDonough. If you’re in one of those towns, start with our Garage Door Repair in Locust Grove or Garage Door Repair in Hampton pages for the local details, or just call (470) 928-4767 and we’ll sort out where you are.
Serving McDonough, GA - Our Local Coverage Area
We’re based in the McDonough area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Repair in McDonough
Garage door repair is any service that restores a garage door to safe, balanced operation: replacing broken springs, frayed cables, worn rollers, bent tracks, damaged panels, or failing sensor and opener components. In McDonough, a repair visit from Servo starts with a full diagnostic test-cycle, photo documentation of every failed part, and a written quote before any work begins. You see what we see. Then you decide.
Most repairs are completed in 60 to 90 minutes on the first visit. A single torsion spring, a set of rollers, a sensor calibration, or a cable replacement is standard work done the same day. If a panel needs ordering to match an uncommon door model, the timeline is longer, but you get the exact lead time in writing before we leave. Call (470) 928-4767 and we’ll tell you honestly what your repair involves.
Garage door repair in McDonough runs $150-$600. Spring repair is $180-$340, cable repair $130-$250, opener repair $120-$320, track realignment $120-$240, panel replacement $250-$500, and roller replacement $110-$220. Every quote is flat, written, and delivered before work starts. The estimate is free, and the price won’t change once we start.
Yes. We repair and install both Chamberlain and LiftMaster openers, and we carry OEM logic boards, belt kits, and gear assemblies for both lines on our trucks. These two brands share engineering and parts, but each has model-specific failure points we know well. If you need garage door opener repair, we’ll tell you in writing exactly what’s wrong and what it costs.
Servo answers the phone with a real person 24 hours a day, 7 days a week, including holidays. If your door is stuck open in McDonough at 11 p.m. or won’t open at 6 a.m. with the car on the wrong side of it, call (470) 928-4767. You’ll get a named technician and an on-the-way text, not a callback. Emergency service is priced the same way as regular service: a written price before work starts.
Every repair is backed by the 365-Day Done Right Promise. If the repair is not right within one year, Servo makes it right. The warranty is documented in your written scope of work, alongside the photo record of what was found and what was done. You leave with paperwork, not a verbal assurance. That’s the standard we started with in 2015 and the one we still work under today.
Clear enough space in the garage for the technician to work along both tracks and above the door, and move vehicles out from under the door. If the door is stuck open, leave it and secure the house from the interior door. You don’t need to buy parts or tools. The technician brings the parts, the camera, and the paperwork. You’ll get the written quote before any work begins.
Schedule Your Garage Door Repair Service in McDonough Today
Call (470) 928-4767 for a free, no-obligation estimate. You’ll get a named technician, a written price before any work starts, and a documented photo record when the job is done. We answer 24/7, including holidays. If you’ve got a written estimate from another company, bring it: our free second opinion policy applies to any competing written estimate, no coupon required.
Written by Marcus Deller, Owner at Servo Garage Doors McDonough, serving McDonough since 2015.