Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterClopay Weather Seal Replacement: The McDonough Owner’s Guide
Clopay weather seal replacement in McDonough typically runs $80-$160 installed for the bottom seal on a standard 16-foot door, and we keep the common profiles on the truck for same-day work. The part itself fails quietly: you’ll notice daylight under the door, water pooling at the slab edge during a Henry County downpour, or a strip of rubber that’s gone stiff and cracked at the corners. We match the replacement to your specific Clopay door so the seal seats correctly the first time, instead of selling you a universal strip that pills out of the retainer in six weeks.
Which Clopay Models This Applies To
The weather seal on most Clopay residential doors is a T-style or bulb-style vinyl strip that slides into a retainer channel on the bottom of the door panel. That retainer is the compatibility gotcha: Clopay uses a few different channel widths depending on the door line. The premium and builder-grade lines – things like Coachman, Gallery, and the 4300/4400 series – usually take a wider, deeper channel than the older Value series or certain IntelliCore models, so measuring the retainer groove before ordering matters more than knowing the door’s exact model name. If your door came with the home and the paperwork is long gone, we photograph the retainer profile and measure the channel on site, then match it to the correct Clopay-compatible profile. We’re an independent service provider, not affiliated with Clopay, which means we can also quote a quality aftermarket equivalent when the OEM part is overpriced or on backorder. The aftermarket seals we stock use the same T-channel geometry and the same UV-stabilized vinyl, and in our experience they hold up as well as the OEM strip for about 40% less on average.
Signs Your Clopay Weather Seal Replacement Is Failing
- Daylight under the door. Get down at eye level with the closed door on a sunny afternoon. If you can see a sliver of light underneath at any point along the width, the seal has compressed or torn and isn’t making full contact with the concrete.
- Water on the garage floor after rain. McDonough’s summer thunderstorms hit hard and fast. When the bottom seal is worn, runoff finds the gap and pools along the interior slab edge, which eventually leads to rust on the bottom panel and mildew in the corners.
- Leaves and debris inside. A healthy bottom seal sweeps debris out. When it starts channeling leaves, pine straw, and those red Georgia clay dust lines under the door, the seal has lost its spring and is dragging lower than the slab line.
- Pest entry points at the corners. Field mice and roaches only need a quarter-inch. The corners of the seal wear first because the door panel flexes there on every cycle, and that’s where we see the most rodent and insect traffic in McDonough garages.
- Noticeable temperature shift in the garage. If your garage felt bearable last August and now reads closer to the outdoor temp, the seal isn’t holding the envelope. For a garage with a finished room above or behind it, this is the first sign owners notice.
BeforeAfterReplacement Cost & What’s Included
For McDonough homes, we quote Clopay-style bottom weather seal replacement at $80-$160 installed for a standard single or double door. The range is driven by two things: the linear footage (a 9×7 door uses about 9 feet of seal, a 16×7 uses about 16 feet) and whether the retainer channel itself needs replacement. If the aluminum or vinyl retainer is bent, corroded, or partially torn away from the panel, that adds a second line item rather than being hidden inside a vague “parts and labor” number. You get the flat written price and written scope before we touch anything, per Clause 1 of The Haven Standard. The work includes removal of the old seal, cleaning the retainer channel, cutting the new seal to length, installing it so the corners don’t gap, and a photo record of the finished installation. The seal itself carries a 365-Day Done Right Promise: if it fails or pulls out within a year of installation, we make it right.
DIY or Call Us?
You can safely check the condition of your weather seal without calling anyone. Slide the old seal out a few inches from the end, flex it, look for cracks, and measure the retainer channel width if you can. That’s useful information for us to have. Where DIY goes wrong on this part is the rubber-to-retainer fit. The seal has to match the channel profile or it’ll either jam partway in or fall right out on the first full cycle. We’ve had McDonough homeowners bring us doors where a universal seal was forced into a Clopay retainer with a heat gun, and the silicone caulk peeled off the vinyl inside a month. Marcus Deller has been reading Clopay retainers long enough to know the part number that belongs in it before anything comes off the wall. If you’d rather skip the trial and error, call (470) 928-4767 and we’ll match it on the first visit.
FAQs
In our climate, expect 3 to 5 years from a Clopay-compatible bottom seal. Georgia sun and heat are harder on vinyl than cold is, and doors that face south or west in McDonough get the worst of it. We see seals on south-facing doors hardening and cracking at the corners around the 3-year mark.
Once the vinyl has cracked, compressed, or lost its memory, a repair doesn’t hold. A patched section will tear again at the seam within weeks because the door flexes at that point on every cycle. Replacement is the honest fix, and for $80-$160 installed, it’s the cheaper option over time. Call (470) 928-4767 for an exact price.
A weather seal replacement on a Clopay door takes 30 to 45 minutes once we’re on site. Most of that time is spent removing the old, brittle seal from the retainer and cleaning the channel, not actually installing the new strip. We don’t rush the prep because that’s where corners get cut.
Yes. We keep the two most common Clopay-compatible T-channel and bulb profiles on our McDonough service vehicles, along with retainers for the door lines that need them. If your door has an unusual channel size, we photograph and measure it, then return with the correct profile, usually next business day. Call (470) 928-4767 and we’ll tell you what we can do same day.
Get Your Clopay Weather Seal Replaced in McDonough
We’re Servo Garage Doors McDonough, and we’ve been working on Clopay and other major-brand doors in Henry County since 2015. Every visit starts with a written price before any work starts, and ends with a photo record of what we found and what we did – Clause 4 of The Haven Standard, which existed before the paperwork caught up to it. The part number tells the story. Everything else is just paperwork. We also stock parts for LiftMaster, Chamberlain, and Genie when the problem turns out to be the opener instead of the seal. For a free estimate on Clopay weather seal replacement, call (470) 928-4767. A live person answers, day or night.
Written by Marcus Deller, Owner, Servo Garage Doors McDonough at Servo Garage Doors McDonough, serving McDonough and nearby areas.