Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Opener Repair & Installation for McDonough Homeowners
Garage door opener repair in McDonough typically runs $120 to $320, and most opener problems are diagnosed within a single visit. Homeowners in Lake Dow, Bridleridge, and throughout Henry County call us when their opener grinds, refuses to budge, or starts reversing for no reason, and we arrive with the parts on the truck. Servo Garage Doors McDonough has handled opener repairs and installations since 2015, and every job starts with a written price before any work begins. If your opener is making noise, hesitating, or dead, call (470) 928-4767 and a live person answers, not a recording.
We’re led by Marcus Deller, who built this business on a rule that still governs every visit: photograph the failed component before quoting a replacement. That rule is now Clause 4 of The Haven Standard, the documented system we work under. It means what you get is not a technician’s opinion but a photo record of what failed, a written scope, and a flat price agreed before the first tool comes out. If you’re researching opener repair in McDonough, you’ve probably read the three-star reviews on other companies. We encourage that. Then ask us to show you the paperwork.
What Our Garage Door Opener Repair & Installation Service Includes
The average McDonough homeowner opens their garage door 1,500 times a year, and the opener, the motorized unit that does the heavy lifting, wears with every cycle. Here’s what we cover under opener repair and installation, from a full replacement to programming a keypad.
Opener Repair
An opener that hums but doesn’t move usually points to a stripped gear inside the drive assembly, a failure we see frequently in McDonough’s summer humidity, which can accelerate plastic gear wear. We open the unit, photograph the damaged gear, and quote the replacement before any work starts. Opener repair in McDonough runs $120 to $320 depending on whether it’s a gear, a logic board (the circuit board that controls the opener), or a limit switch, which tells the opener where to stop.
Opener Installation
New opener installation in McDonough costs $250 to $550, including mounting hardware, safety sensor alignment, and testing. We install belt-drive, chain-drive, and wall-mount openers, and we match the unit to your door’s weight and your ceiling space. Every installation includes a written scope with the opener model, the labor, and the total price, all delivered before the work begins.
Smart Opener Upgrade
If your opener predates Wi-Fi, you can check and close your garage door from your phone with a smart opener upgrade. We install and configure the unit, connect it to your home network, and walk you through the app before we leave. In McDonough, smart upgrades are popular with commuters who want to verify the door is down while they’re parked at the Henry County Park & Ride.
Keypad Entry
A keypad lets you open the door with a four-digit code instead of a remote, which matters if your kids lose remotes or you don’t want to carry one on a run through Alexander Park. We install wired and wireless keypads, program the code to your preference, and take a photo of the finished installation for our records and yours. Keypad work is included in most opener installations or can be added to a repair visit.
Remote Programming
Remotes lose their link to the opener more often than the opener itself fails, especially after a power surge, which McDonough sees during summer thunderstorms. We program new remotes, reprogram existing ones, and pair garage door openers with vehicle HomeLink systems. If three remotes have stopped working, the culprit is usually the opener’s receiver, and we’ll know within ten minutes of showing up.
Battery Backup
An opener with battery backup keeps working when the power goes out, and in McDonough, power goes out during storm season. We install battery backup units that slot into compatible LiftMaster and Chamberlain openers, and we test the battery under load before we finish. When the next tree takes out a line on Jonesboro Road, the door still opens.
We stock parts for all eight major brands on the truck. That’s LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. You can read more about what we do on our home page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Opener Repair & Installation
LiftMaster is the most common opener we install in Henry County, and we carry their OEM gears, logic boards, and wall consoles. The LiftMaster 8500 wall-mount opener has a known failure point in its travel module, and we’ve replaced enough of them that we can diagnose it over the phone with a single symptom description.
Chamberlain, LiftMaster’s consumer line, shows up in most McDonough homes built after 2015. We service Chamberlain belt-drive and chain-drive units daily, and we keep their safety sensors and remotes in stock. Chamberlain openers share the same internal architecture as LiftMaster, which means we can repair either without waiting on parts.
Craftsman openers are common in McDonough homes built between 2000 and 2012. Craftsman’s older chain-drive units use a plastic gear that strips with age, and we replace it with a metal equivalent when the job calls for it. If you have a Craftsman, Genie, Raynor, or any other make, we service it.
BeforeAfterSigns You Need Garage Door Opener Repair & Installation Right Now
- The opener grinds but the door doesn’t move. This is classic stripped-gear failure. The motor runs, the gear inside spins, but the teeth are gone. It won’t heal itself, and every extra second of grinding wears the motor further.
- The door reverses before it reaches the floor. That’s usually a limit-switch or force-setting problem. The opener thinks it hit an obstruction when it didn’t. It’s also a safety issue: if the door doesn’t close, the garage is open to the street.
- The wall console works but the remotes don’t. If all remotes fail at once, the problem is inside the opener’s receiver board. We see this after lightning strikes near the house, and McDonough gets its share.
- The opener runs for a few seconds and quits. Overheating or a failing capacitor. If the motor is too hot to touch, stop using it. Continuing to run a hot motor shortens its life by months.
- The opener is more than 15 years old. Openers built in the early 2000s lack the safety features and battery backup of modern units. A replacement costs less than three repair visits, and the new unit comes with a written warranty.
Our Garage Door Opener Repair & Installation Process - Step by Step
- 1
You call, a person answers. When you call (470) 928-4767, a live person picks up, not an answering service. We take your address, ask what the opener is doing, and schedule a visit. Emergency calls get a named technician and an on-the-way text.
- 2
The technician arrives and diagnoses. We test the opener’s motor, gear, logic board, limit switches, and safety sensors. Before we quote anything, we photograph the failed component. Clause 4 of The Haven Standard requires it.
- 3
You receive a written scope and flat price. No verbal guesses. You get the exact work, the parts, the labor, and the total price in writing. You approve it or you don’t. If you don’t, you pay nothing.
- 4
We do the work and test it. Repair or installation, done to the manufacturer’s spec. We cycle the door five times, check the safety sensors, balance the door, and confirm the opener’s force settings. The work isn’t done until the door performs correctly.
- 5
You get a documented photo record. Every visit ends with photographs of what was found and what was finished, delivered to you. You leave with evidence, not a story.
If you’ve gotten a written estimate from another company, bring it. Our Free Second Opinion offer covers opener work the same as any other repair. We’ll match the scope line by line and tell you what’s necessary and what isn’t.
How Much Does Garage Door Opener Repair & Installation Cost in McDonough?
A typical opener repair in McDonough runs $120 to $320. A gear replacement runs at the low end of that range. A logic-board replacement runs higher. Opener installation in McDonough runs $250 to $550 for a full unit installed and tested. Those are flat prices, quoted in writing before work begins.
Here’s what affects the price in this market:
- The failure point. A stripped gear is cheaper than a fried logic board. We’ll show you a photo of whichever one you have before we quote.
- The opener’s age. Parts for a unit made in 2008 may be discontinued. A replacement is often the more honest recommendation, and we’ll tell you that in writing.
- The drive type. Belt-drive replacement rails cost more than chain-drive. The difference is noise: belts are quieter, chains are cheaper.
- Ceiling space and mounting. Wall-mount openers for high-lift doors cost more to install than standard trolley units.
How to avoid overpaying in this market: insist on a written price before any work starts. Clause 1 of The Haven Standard mandates flat, written pricing on every job. If a company says “call for a quote” or won’t commit to a number until they’re in your driveway, that’s not how this works. What’s included in our free estimate: the visit, the diagnosis, the written scope, and the photo record. You don’t pay for the estimate even if you choose not to proceed.
We serve the entire McDonough area, including neighborhoods off Highway 81 and Jonesboro Road. If you’re in Garage Door Opener Repair & Installation in Hampton territory or closer to Locust Grove, our service area covers you.
Garage Door Opener Repair & Installation Near McDonough - Our Service Area
Servo Garage Doors McDonough covers all of Henry County and the surrounding cities: McDonough, Locust Grove, Hampton, Stockbridge, Lovejoy, Jonesboro, Morrow, Griffin, Riverdale, Forest Park, and Fayetteville. Typical response time in McDonough proper is two to four hours for scheduled service, and emergency calls are answered 24/7 by a live person with a named technician dispatched. For opener work in the rest of Henry County, see our Locust Grove opener page or the Hampton opener page.
Serving McDonough, GA - Our Local Coverage Area
We’re based in the McDonough area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Opener Repair & Installation in McDonough
It’s the diagnosis, repair, and replacement of the motorized unit that raises and lowers your garage door. This includes mechanical parts like gears and trolleys, electrical parts like logic boards and limit switches, and full installation of new openers. Servo Garage Doors McDonough photographs the failed part before quoting anything, then delivers a written flat price.
Most opener repairs in McDonough take 45 minutes to two hours on-site. Gear replacements run under an hour. Logic-board swaps take longer because we test the full system after installation. We tell you the expected time before we start.
Opener repair runs $120 to $320. Opener installation runs $250 to $550. The price is flat, written, and agreed before any work starts, per Clause 1 of The Haven Standard. Call (470) 928-4767 for an exact quote, and bring any competing written estimate for a Free Second Opinion.
Yes. Along with Chamberlain, Genie, Craftsman, Raynor, Clopay, Amarr, and Wayne Dalton. We stock OEM LiftMaster parts on the truck in our McDonough location, which means most repairs are completed same-day rather than waiting on parts delivery.
Yes, 24/7, including holidays. You reach a live person, not a recording. We send a named technician with an on-the-way text. If your door is stuck open or closed, call (470) 928-4767 and we’ll dispatch.
Every repair and installation is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right. The warranty is written into your documentation, not delivered as a handshake. New openers also carry the manufacturer’s warranty, and we explain the terms in writing.
Clear the area around the garage door opener unit and unplug the opener if it’s safe to do so. Have your remote or keypad nearby for testing. You don’t need to move vehicles or remove anything from the garage; we work around the area and document everything we find.
Schedule Your Garage Door Opener Repair & Installation Service in McDonough Today
Call (470) 928-4767 and a live person answers. You’ll get a scheduled visit, a written flat-price estimate before any work begins, and a documented photo record when the job is done. Whether it’s a stripped gear, a dead logic board, or a full opener replacement in McDonough, the price is in writing first. No urgency scripts. No surprises. Just the diagnosis, the documentation, and the door working again.
Written by Marcus Deller, Owner at Servo Garage Doors McDonough, serving McDonough since 2015.